Mixture control 177B or any 177

jcar01jcar01
in General Discussion

Can anyone post a photo of the mixture control attach bracket and routing in a Cessna 177B or any 177. Helping a friend with his mixture cable and I want to make sure it attached properly. IPC is no help. Posting a photo from another forum. Looking for a better photo of the attach bracket. Thank you

476451549_1690361741580714_6569565089402975838_n-carb-mixture.jpg


Comments

  • MikeJJMikeJJ Aviation Director, Forum Moderator
    edited June 25

    I see there are no member replies to this topic, so let me offer this...

    The best person to confirm the control cable is routed properly is the A&P/IA who will perform the work (or supervise the work being performed) and who is required to fill out the necessary paperwork, sign the logbook, and return the aircraft to service.

    Regards,

    Mike

    • Michael Jay Jones (MikeJJ), 
    • Cessna Owners Aviation Director, Forum Moderator, Author
    • Commercial, Instrument, CFI - Airplane
    • Commercial Helicopter, Remote Pilot UAS
    • FAA Wright Brothers Master Pilot,
    • 50+ years in aviation, and still learning!


  • tbraeunigtbraeunig

    jcar,

    I had a similar question regarding the correct placement of the throttle cable support bracket on my 172. (it turned out that the bracket had been installed incorrectly)

    I contacted Cessna technical support at:

    Piston_Support@txtav.com

    and got the information I needed including a detailed engineering drawing showing the bracket installation. They should be able to provide the information that you need.

    Tom


        

Sign In or Register to comment.