cessna 210 panel placks

william shettlewilliam shettle
in General Discussion

The description of the various fuses and switches on my 210 were indented into the plastic. Over the years the black coloring in the indented areas describing what the various fuses etc were controlling has worn off.Dies anyone have any ideas how to get the areas back in clear view. i have tried labeling but this doesn`t look so good.. thank you Bill Shettle

Comments

  • Scott ShererScott Sherer COO Forum Moderator

    Hi Bill,

    I've been labelling my plane for the last few years with great success. I actually purchased my first labeler and that wasn't very good. My second labeler did the job well. Here's a link to my second labeler. https://www.officedepot.com/a/products/605703/Brother-Ptouch-Labelmaker-PTD210/

    Scott Sherer
    Wright Brothers Master Pilot, FAA Commercial Pilot
    Aviation Director, Cessna Owners Organization Forum Moderator and Cessna Owners Author.

    Need help? Let me know!

  • Fairchild24Fairchild24

    You could try touching up the paint in the indented type with either a small paint brush, a toothpick, or a sharpened paper match stick. Work slowly and keep a wipe cloth close.

Sign In or Register to comment.